VSI Sand Making Machine
VSI Sand Making Machine Introduction
The VSI Sand Making Machine of SBM is a newly equipment with international advanced level, it is both a stone crushing machine and shaper machine. VSI Crusher is called Sand Making Machine, also called Shaper Machine and Sand Making Machine, it dues to its structure and function that integrates two functions into one, it can be used as a crusher or a shaper by changing feeding methods and core structure of the crushing cavity. Thus, if you own the VSI Sand Making Machine, you have a crusher and a shaper in the same time. However, it's the ideal artificial sand making machine.
VSI Sand Making Machine Application
VSI Vertical Shaft Impact Crusher is the new ear of crushing field; it's widely applied in hydropower station construction, expressway and railway building, concrete batching plant, bridge and tunnel building. It has two functions of the VSI Sand Making Machine: crushing and shaping. Almost all of minerals can be crushed, contains the hardest minerals, such as metal and non-metal ores, cement, artificial sand, refractory material, bauxite, silicon carbide, glass material, building materials, etc.
VSI Sand Making Machine Advantage
1. Little dust pollution and litter noise.
2. High efficiency and low consumption.
3. More most hard materials can be crushed.
4. Final product of cubical shape and low cost.
5. Wear resistant materials used in special structure.
6. Strengthen structure and tenacity with rivet hot technique.
7. High performance, convenient maintenance and installation.
8. Advanced light oil lubrication system ensures shaft bearing lower temperature.
Discover your crusher and grinder machine at the discount!
VSI Sand Making Machine Main Parts
VSI Sand Making Machine is made up of first stage impact curtain with anvils, impact curtain adjusting rods, second stage impact curtain with anvils, rotor, liner plate, blow bar, wedge lock assembly, discharge opening, third stage impact plate, back-up bar and so on.
1. Falsework
2. Main Frame Assmebly
3. Central Rotator Part
4. Transmission Motor Part
5. Frame Base Part
6. Main Shaft Assmebly
| Model | B-VSI7611 | B-VSI8518 | B-VSI9526 | B-VSI1140 | |
| Capacity(t/h) | Feed Both at Center and Sides | 120-180 | 200-260 | 300-380 | 450-520 |
| Feed At Center | 60-90 | 100-130 | 150-190 | 225-260 | |
| Max Feed Size(mm) | Sofe Material | <35 | <40 | <45 | <50 |
| Hard Material | <30 | <35 | <40 | <45 | |
| Rotation Speed(r/min) | 1700-1890 | 1520-1690 | 1360-1510 | 1180-1310 | |
| Power(kw) | 110-150 | 180-220 | 264-320 | 400-440 | |
| Overall Dimension l*w*h (mm) | 3700×2150×2100 | 4140×2280×2425 | 4560×2447×2778 | 5000×2700×3300 | |
| Weight(t) | 7.8 | 10.3 | 16 | 25.6 | |
| Power Supply | 380V,50HZ | 380V,50HZ | 380V,50HZ | 380V,50HZ | |
| Vibrating Sensor | Detect range: 0.1-20mm/s continous and adjustable | ||||
| Lubrication and Hydraulic Station | Power | 2×0.31kw | |||
| Safety Assuance | Double oil pumps assure enough oil supply; automatic switch off with no oil stream or hydraulic strength; lower the temperature with cool water in summer; raise the temperature with motor in winter. |
||||
| Overall Demension l*w*h(mm) | 820×520×1270 | 820×520×1270 | |||
| Power of Oil Tank Heater | 2kw | ||||
Note: This specification is just reference, any changes are subject to the VSI Sand Making Machine Products.
How VSI Sand Making Machine Works?
Raw materials fall into the hopper, then through the feeding opening in the center and enter
the high speed rotor which will throw out the materials with high speed (at 60-75m/s). Raw materials firstly strike those materials that are free falling down. Then, the materials strike the materials-liner in the vortex or the impact liner and are rebounded to the top of crushing cavity. This can form a closed circulation through the circular classifier system. Then crushed products fall down. After that, the falling materials with materials shot from the impeller form a continuous materials curtain. At last, crushed materials be excluded through the bottom of discharging hole.
2. Ring Feeding:
Raw materials will be divided into two parts by the distributing plate when fall into the hopper and annular hole. A part of materials cross the distributing plate and enter the high speed impeller and then accelerated and thrown out .The other part falls down from the sides of distributor. Raw materials firstly strike the free falling down materials. Raw materials firstly strike those materials that are free falling down. Then, the materials strike the materials-liner in the vortex or the impact liner and are rebounded to the top of crushing cavity. This can form a closed circulation through the circular classifier system. Then crushed products fall down. After that, the falling materials with materials shot from the impeller form a continuous materials curtain. At last, crushed materials will be excluded through the bottom of discharging hole.