VSI5X Shaper Machine
VSI5X Shaper Machine Introduction
Shaper machine manufacturer by SBM designs and manufactures VSI5X vertical crusher is the newest generation of vertical shaft impact crusher, which adopts world-class technique and owns lots of independent intellectual property rights and patents. It incorporates three crushing methods: material on material, material on iron and falling at side.
VSI5X Shaper Machine has become the advance shaper machine in sand making industry. It as the shaping tools and sand making machine and widely applied in stone process and crushing in various metal and nonmetal. This is a fact that SBM is the professinal shaping tools manufacturer in the world.
VSI5X Shaper Machine Application
Since shaper machine manufacture of SBM has been developed and manufactured the VSI5X vertical crusher, it provides a convenient for mining industry. VSI5X shaper machine is become the most important equipment in sand making industry, it is widely used in various metallic and nonmetallic ores, cement, refractories, abrasives, raw material, construction, sand, metallurgical and other industries. It is suitable for ores and rocks with different hardness.
VSI5X vertical crusher is highly recommended to crush high hardness materials, such as nonferrous metals, iron ore, nonferrous metals, corundum, basalt, bauxite, quartz sand, etc.
VSI5X Shaper Machine Advantage
1. Optimized deep rotor.
2. Unique feeding method.
3. Reversible protecting plate.
4. Wearing parts increase about 30%-50%.
5. Special dustproof seal system to oil mouth.
6. High performance in less downtime of maintaining.
7. High precision roller bearing, smooth main unit running.
8. Increasing throughput by 30% with the increased space.
9. Bearings and hydraulic uncapping device comes from foreign.
Discover your crusher and grinder machine at the discount!
VSI5X Shaper Machine Main Parts
VSI5X Crusher is made up of first stage impact curtain with anvils, impact curtain adjusting rods, second stage impact curtain with anvils, rotor, liner plate, blow bar, wedge lock assembly, discharge opening, third stage impact plate, back-up bar and so on.
1. Guard Rail
2. Plat Form
3. Buffer case
4. Distributing Plate
5. Distributor
6. Feed Opening
7. Rotor
8. Manual Cylinder
9. Impact Block
10. Main Motor
11. Adjustment Setting
12. Lower Part
13. Main Shaft Assemmbly
14. Discharging Hole
15. Frame
| Model | VSI5X7615 | VSI5X8522 | VSI5X9532 | VSI5X1145 | |||
| Capacity (t/h) | Feed Both at Center and Sides | 150~280 | 240~380 | 350~540 | 500~640 | ||
| Feed at Center | 70~140 | 120~200 | 180~280 | 250~360 | |||
| Max Feed Size (mm) | Soft Material | <35 | <40 | <45 | <50 | ||
| Hard Material | <30 | <35 | <40 | <45 | |||
| Rotation Speed (r/min) | 1700~1900 | 1500~1700 | 1300~1510 | 1100~1310 | |||
| Double Motor Power (kw) | 110~150 | 180~220 | 260~320 | 400~440 | |||
| Overall Dimension l×w×h(mm) | 4100×2330×2300 | 4140×2500×2700 | 4560×2600×2900 | 5100×2790×3320 | |||
| Weight (t) | 8.6 | 11.8 | 17.5 | 27.5 | |||
| Power Supply | 380v，50hz | ||||||
| Lubrication and Hydraulic Station | Double Motor Power | 2X0.31kw | |||||
| Safety Assurance | Double oil pumps assure enough oil supply, automatic switch off with no oil stream or hydraulic strength, lower the temprature with cool waterin summer, raise the tamprature with motor in winter. | ||||||
| Power of Oil Tank Heater | 2kw | ||||||
| Overall Dimension l×w×h (mm) | 820×520×1270 | ||||||
Note: This specification is just reference, any changes are subject to the VSI5X Shaper Machine Crusher Products.
How VSI5X Shaper Machine Works?
Raw materials fall into the hopper, then through the feeding opening in the center and enter
the high speed rotor which will throw out the materials with high speed (at 60-75m/s). Raw materials firstly strike those materials that are free falling down. Then, the materials strike the materials-liner in the vortex or the impact liner and are rebounded to the top of crushing cavity. This can form a closed circulation through the circular classifier system. Then crushed products fall down. After that, the falling materials with materials shot from the impeller form a continuous materials curtain. At last, crushed materials be excluded through the bottom of discharging hole.
2. Ring Feeding:
Raw materials will be divided into two parts by the distributing plate when fall into the hopper and annular hole. A part of materials cross the distributing plate and enter the high speed impeller and then accelerated and thrown out .The other part falls down from the sides of distributor. Raw materials firstly strike the free falling down materials. Raw materials firstly strike those materials that are free falling down. Then, the materials strike the materials-liner in the vortex or the impact liner and are rebounded to the top of crushing cavity. This can form a closed circulation through the circular classifier system. Then crushed products fall down. After that, the falling materials with materials shot from the impeller form a continuous materials curtain. At last, crushed materials will be excluded through the bottom of discharging hole.